NSF M1 Release Agent for Food & Plastic Industry – CRC Food Grade Silicone Mold Release | PT Panca Makmur Baru

CRC Food Grade Silicone Mold Release is a silicone based release agent with a light silicone content (±3%) designed to assist the mold release process in various industrial applications, especially those requiring food safety standards.

This product:

• Colorless
• Odorless
• Non-staining
• Non-corrosive
• NSF M1 Registered
• Meets FDA CFR 175.300 (release agent)
• Meets FDA CFR 178.3570 (lubricant – incidental food contact)

This means that this product is safe to use in food and beverage production environments, as long as application procedures are followed.

Why is Mold Release Important in Industry?

In manufacturing processes such as:

• Injection molding
• Compression molding
• Blow molding
• Extrusion
• Investment casting

Problems often occur such as:

• Product sticks to the mold
• Damaged mold surfaces
• Slow production times
• Increased scrap

Proper use of mold release agents will:

• Facilitates product removal from the mold
• Reduces production defects
• Speeds up the production cycle
• Extends mold life

And most importantly for the food industry: safe for the food processing environment.

Key Features & Benefits of CRC Food Grade Silicone Mold Release

1. Light Silicone Content (3%)
   • Provides long term lubrication without leaving an excessively thick film.
2. Long Lasting Lubrication
   • Helps produce more products in less time increasing production efficiency.
3. NSF M1 Registered
   • This means it is safe to use in food processing areas as a release agent and indirect contact lubricant.
4. Complying with FDA Regulations
   • CFR 175.300 – Coating resinous & polymeric
   • CFR 178.3570 – Lubricants with indirect contact

This is very important for food safety & compliance audits of the F&B industry.

CRC Food Grade Silicone Mold Release Application

This product is suitable for a wide range of materials and processes, such as:

• Injection and Compression Molding in:
  • ABS
  • Acetyl
  • Acrylic
  • Noryl®
  • Nylon
  • Polycarbonate
  • Polystyrene
  • Polysulfone
  • Wax
• Can also be used on:
  • Blow molding
  • Extruders
  • Foundries
  • Investment castings

Due to its non corrosive nature and the fact that it leaves no harmful residues, this product is very flexible for various production lines.

Why Food Grade?

In the food & beverage industry, the use of lubricants or release agents carelessly can cause:

• Product contamination
• Failed HACCP/GMP audits
• Product recall risk
• Regulatory sanctions

Therefore, only products that have NSF registration or meet FDA standards are recommended for use.

CRC Food Grade Silicone Mold Release provides peace of mind because it meets these requirements.

Differences in Mold Release Food Grade vs Non Food Grade

Aspect	Food Grade	Non Food Grade
Safe for F&B area	✔	❌
NSF Registered	✔	Not always
FDA Compliant	✔	Not always
Risk of contamination	Very Low	High

For the food, bakery, beverage, dairy, and F&B packaging industries, the use of non-food grade products is very risky.

Benefits of Using CRC Food Grade Silicone Mold Release

• Faster production
• Reduced downtime
• Reduced scrap and rejects
• More durable molds
• Safe for food safety audits
• Increased production line efficiency

Tips for Proper Use

1. Clean the mold surface before application.
2. Spray thinly and evenly.
3. Avoid over-application.
4. Follow internal GMP procedures.

With proper use, print performance and product quality will improve significantly.

Who is Suitable for Using This Product?

• Food & Beverage Industry
• Plastic food packaging factory
• Injection molding industry
• Manufacturing workshop with food safety standards
• Casting & extrusion industry

Why Buy at Panca Makmur Baru?

At Panca Makmur Baru, you will not only get original products, but also:

• Technical consultation tailored to industry needs
• Complete CRC product line
• Support for MRO & maintenance needs
• Appropriate solutions, not just product sales

Need CRC Food Grade Silicone Mold Release for your production line?
Make sure you use a safe and standard release agent.

Want to learn more or order now? Contact us at PT Panca Makmur Baru – the official CRC distributor in Indonesia. Click the “Contact Us” button now!